Suzuki Swift Sport How to Remove the Genuine Muffler (Rear Piece)
- 2021.05.23
- Fiddling
- Exhaust, Genuine, Muffler, Rear Piece, Remove, Suzuki, Swift Sport, ZC33S
The dealer told me that we couldn’t replace the muffler, so I did it myself. I will explain in a little more detail how to remove the rear piece for DIYers in the world.
Chock the front and jack up the rear with a floor jack to hang a rigid rack firmly. Obviously, if you do it with just a pantajack, you’ll probably die.
I will explain in advance with the muffler after removing it. In addition to the exhaust flange, there are four fixed points. It is number ②③④ of the image. These four are rubber floating.
First, remove the muffler cutter from ① in the image. Use a 10mm wrench.
Lay a cardboard and dive to remove the nut on the exhaust flange. You don’t have to be afraid because it will not fall as soon as you remove it.
Next, remove the rubber mount. It’s a very soft rubber, so you can remove it interestingly just by spraying it with an oil spray. Be careful not to get the oil spray in your eyes.
Remove it steadily.
Two rubbers are close to each other around the back right side, which makes it a little difficult. It is smoother to remove one of the rubber mounts from the vehicle body side instead of the muffler side.
Before removing the last mount, apply masking tape to the flange and torsion beam just in case.
Now, when you remove the last mount, the muffler will finally fall. It’s light enough to be supported by one hand, so don’t panic.
As shown in the figure, once you put it forward, the muffler end will come off.
It came off unexpectedly easily. After all, all you have to do is remove the muffler end and the two nuts and remove the rubber, so it’s an easy. It took a lot more time to prepare in advance such as jacking up. It’s done.
- Previous Posts
Suzuki Jimny JB74 Cutting the Front Bumper 2021.05.16
- Next Post
Nissan Figaro Repair of Rust and Corrosion 2021.05.23