Nissan Figaro How to Adjust Valve Clearance
It is time to adjust the tappets as the weather is about to get warmer. Remove the two 10 mm bolts in the red circle. I should have taken more pictures, but there is also a throttle wire stay bolt in the front, so remove that as well (10mm x 1). Remove the two hoses that are stuck in the head cover. and the connector of the throttle valve switch. The connector can be pulled out by removing the U-shaped metal clip with a precision screwdriver. First, loosen the rubber hose band on the turbine side of the intake pipe. Loosen the hose band of the rubber hose on the turbine side, and push it into the throttle side as shown by the red arrow. and push it into the throttle side. Next, loosen the hose band of the rubber hose on the throttle side. Then, turn the hose band of the throttle side rubber hose about 90 degrees as shown by the red arrow. The intake pipe can be pulled out. Then, remove the two 14mm nuts on the head cover. The head cover will come off. Since the adjusting bolt had a pitch of 1mm. If you turn […]