Land Cruiser J100 Hitch Cargo Carrier Installation

Assemble and Install CURT 18153 Basket-Style Cargo Carrier to TOYOTA Land Cruiser J100.

Attached hitch member is SUNTREX Tag Master Standard, 5.0cm for receiver. The hitch cargo’s adapter is for US standard 2inch / 5.08cm, so it seemed that it needs to be scraped a little, but it was installed without any processing. A little tight but everything is OK.

Let’s assemble. You should prepare 17/19/24mm wrench and monkey wrench.

There is a little gap in the joint. If it wobbles, you’ll need a spacer.

When installing, it is better to fold the hitch cargo like this so that it can be inserted smoothly into the hitch member.

Installation is complete. The reflector is a little poor. External reflector may be good.

You can fold it when you’re not using it, but it’s longer because of the clearance. But it’s convenient because you can open the back door even when folded. However, since you can’t see it side mirror or rear-view mirror at all, be careful not to hit it when parking.

So recommend using rear-view camera. Have fun!