Nissan Figaro How to Replace the Thermostat

Nissan Figaro hasn’t been able to raise the water temperature for a while. I thought that the thermostat was stuck open and replaced it.

First, prepare the tools. Prepare a 10mm box wrench and ratchet wrench, a flat-blade screwdriver and water pump pliers.

First, remove the turbo intake pipe.

Remove the drain bolt of the radiator and remove the coolant.

You can access the thermostat by removing the cooling water pipe to the thermostat. For the time being, the intake port of the turbo is packed with waste cloth to prevent foreign matter from entering.

Thermostat appears if you remove three 10mm bolts.

The thermostat is oriented and the TOP stamp is on top.

Just in case, apply liquid packing and install it, and then assemble in the reverse order. Put new coolant in the radiator, turn the engine for a while, check that the thermostat opens, check the amount of coolant, and finish! It took about 40 minutes.