Skyline R34 GT-R Front Bumper Gap Adjustment

I’ve always been concerned the gap of front bumper. So I decided to fix it cheaply.

There is quite a gap between the headlight and the bumper. This bothers me.

This is the parts I will use here.
– bolt(M6×120㎜)
– high nut(M6×30㎜)
Both are made of iron. You can get them for about $5 at home improvement center.

Then carrying out. Attach the previous one to the bolt at the red circle. It comes out from the car body side and is fixed with a nut.

First of all, take the stay fixing the bumper. You cannot install the bolt without removing this.

Let’s install the bolt. I don’t think there is a problem without it, but it would be good to have a spring washer to prevent it from loosening.

I think there are various ways to adjust it, but I adjusted it while lifting the bumper. I think that there is no problem if you adjust with your own method.

Adjustment is complete. The gap of the bumper has disappeared successfully. As a precaution, keep in mind that if you raise it too much, the hood will not close. By the way, this time I dropped the bonnet from a height of about 30 cm and adjusted it with the position where the bonnet was closed as a guide.

Is it possible for the diffuser to do its best with this?