Honda S2000 How To Replace The Engine Mount
- 2020.11.08
- Engine mount, Honda, Replacement, S2000
Replacing the engine mount is a little difficult. Anyone with motivation and patience can do it. The tools are a box wrench and a socket wrench. The smaller the socket, the better. Rigid racks and garage jacks are a must. The rest is a genuine scissors jack. Perform normal jack up. Raise it enough for people to enter. Next, remove the two nuts on the underside of the mount. There are a total of 4 on both the left and right. Then use a scissors jack to raise the engine at the joint between the engine and the mission. It is around the red circle. Raise the engine until the screw heads in this photo come out a little. If you have an engine damper, don’t forget to remove it before raising the engine! In addition, it may be better to remove the intake of the aftermarket product for safety. Remove the four bolts on the driver’s side and engine side shown in this photo. I think that you can take a lot of space by lowering the coupler of the air conditioner cord from the air conditioner compressor and removing it, and by removing the ground wire from the […]