Honda S2000 Creating an Oil Filter Stopper
- 2021.08.22
- Creation, Honda, Installation, Oil filter, S2000, Stopper
It seems that the oil filter (element) of S2000 is often loosened. I haven’t loosened it until now, but since I’m doing Gymkhana, I decided to make it as insurance. Regarding the hose band, the specifications are different, 64Φ when using an element made by an outside company and 79Φ when using a genuine element. Prepare a hose band that matches the element to be used. The material is made of stainless steel. I chose stainless steel wire (1Φ) as the wire. This also serves as a rust preventive measure. The L-shaped angle is fastened together with the spool valve. Since the bolt is 6 mm, prepare an angle that matches it. There is no problem even if you do not attach the spring snap. I just thought it would be easier to make it removable during maintenance. At first, I was planning to use the commercially available angle as it is, but I felt awkward, so I bought a suitable hardware again and bent it. Tighten the angle together with the spool valve. After connecting to the angle with a spring snap, fix the oil filter and you’re done. I don’t think it is necessary to stretch the wire […]