Civic Type R EK9 How to Replace the Fuel Filter
- 2021.06.06
- Fiddling
- Civic, EK9, Fuel filter, Honda, Replacement, Type R
Replace the fuel filter that you think has not been replaced for a long time. The current mileage is 160,000 km.
Before starting work, I removed the fuse just in case to release the fuel pressure. It is quicker to remove the intake pipe than to struggle in a small space. Place a waste cloth under the filter in case of gasoline overflow.
The fuel filter used is Monotaro. Two copper washers are also included.
First, loosen the flare nut on the lower side. A flare nut wrench of 14mm is required as it is fairly tight. Gasoline will leak, so tighten it lightly.
After loosening the upper union bolt, loosen and remove it with 2 bolts and 1 nut on the bracket, 10 mm. It is easier to have a universal joint and a deep socket.
The figure which removed the whole bracket. It smells so bad because it leaks a lot of gasoline. The plastic bracket to which the mysterious hose is connected has crumbled.
Old and new fuel filters. I like black like genuine.
Insert a new copper washer above and below the union bolt and tighten it tightly. Start the engine, check that there are no leaks, and finish. I’d like to expect better feeling and better fuel economy.
- Previous Posts
NSX NA1 How to Replace the Radiator 2021.05.30
- Next Post
Civic Type R EK9 Measures Against Leaks on the Roof 2021.06.07