Toyota 86 How to Replace the Steering Wheel

Before disconnecting the steering wheel, first disconnect the negative terminal of the battery.

Next, if you look at the red circle in the photo from the side, there is a hole. Insert a flat-blade screwdriver there to unlock the airbag. (3 places)

Yes, the airbag has come off. It’s easy.

Use a flat-blade screwdriver to pry the airbag terminal slightly to remove it.

Now, let’s remove the steering wheel. Loosen the center bolt and pull it while pushing and pulling it back and forth and left and right with the bolt slightly applied. The bolt is pretty stiff.

The steering has come off. Install the airbag canceller and horn terminals.

Attach the steering boss and insert the wiring inside. Make sure that the triangle mark on the boss is on top.

Connect the wiring of the horn and attach the steering to complete. After that, connect the battery and check if the navigation starts and if the airbag warning light goes out.