Honda CR-Z How to Remove the Rear Bumper

First, put a protective covering on the body.

Remove the two screws from the tire house. There are a total of 4 on the left and right.

Remove the hexagonal screw where the hatch was opened. There are a total of 2 on the left and right.

Remove the screw underneath and remove the clip that stays on the body. There are a total of 2 screws on the left and right, and 4 clips.

Now that there is nothing to hold the bumper in, pull it out. However, the license plate was caught and could not be removed.

The license plate pops up when you remove the hook (red arrow) that holds the bottom side. Then, dodge the gap in the bumper and remove it. And don’t forget to remove the coupler of the license plate light.

The removal is completed successfully.